Toshiba 26WL46B, Руководство по обслуживанию

Страница: 9 / 116

4-2. Conten t s to be Confirmed in Service Work (Check in Self Diagnosis Mode)
4-3. Executing Self Diagnosis Function
Procedures
(1) Set to service mode.
(2) Pressing “9” key on remote unit displays self diagnosis result on screen.
Every pressing changes mode as below.
SERVICE mode SELF DIAGNOSIS mode M2 System version info Version check(QA01,QM24 etc)
(3) To exit from service mode, turn power off.
Contents of self diagnosis
Contents of self diagnosis
B. Indication of part code of microprocessor.(QA01)
C. Total Time of Power on (hour)
D. Number of operation of power protection circuit
E. Check of communication status in BUS line
F. Check of signal line by sync signal detection
Display items and actual operation
Display items and actual operation
* Please see item.4-4
Table 3
<SELF DIAGNOSIS mode>
<OSD/TEXT M2 Sub System Information> <Version Check>
Description for Version Check Screen
QA01 **** - Version information for MainMicom(QA01)
QA02 ** - Version information for E
2
PROM(QA02)
QF14 ****-** - Version information for M2 Sub-Micom(QF14)
QM24
**
- Version information for BEP Sub-Micom(QM24)
QM17 ** - Version information for BEP E
2
PROM(QM17)
– 9 –