Toshiba 26WL46 Series, Руководство пользователя

Страница: 8 / 24

8
Connections and controls
If the power-on light is unlit press the POWER button
underneath the bottom right corner of the television to
switch the television on, then press a number button on
the remote control to see the screen, it may take a few
moments.
To put the television into Standby press
i
on the remote
control. To view the television press
i
again or any of
the number buttons. The picture may take a few seconds
to appear. Standby should only be used for short periods
of time.
To set up the television you will now need to use the
on-screen menus. Press the
MENU
button on the
remote control to see the menus.
The menu bar at the top of the screens will show five
different topics shown in symbols. As each symbol is
selected by pressing the
S
or
R
button on the remote
control, its respective options will appear below.
To use the options press the
Q
button on the remote
control to move down through them and
OK
,
S
or
R
to
select the required choice. Follow the on screen
instructions. The functions of each menu are described in
detail throughout the manual.
A wide variety of external equipment can be connected via the sockets located on the side of the television.
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the top of the television may be used for some functions.
To alter the volume press
— j
+
.
To alter the programme position press e e
F
f f .
Press
MENU
and
S
,
R
,
Q
or
P
to control the sound
and picture options.
Press
MENU
to finish.
When connecting mono sound equipment to
EXT 6
,
connect the audio output of the equipment to the
L/Mono socket on the television.
To select the Input, press B until the display shows
EXT6
as described on page 18. The television will
automatically sense the type of signal.
Please always refer to the owner’s manual of the
equipment to be connected for full details.
Please note: Inserting the headphone jack will mute the
sound from all speakers.
Switching on Using the controls and connections
Power Button
RED – Power On
GREEN – On-timer set
INPUT 6
(EXT 6)
The television
screen can swivel
15 degrees to the
left and right.
☛