35
E
6. Setting of Scart socket
(
1
)
(
AV1
)
/
(
2
)
(
AV2
)
1
Press
MENU
, the menu will appear on the screen. Press or to select
(SETUP) menu. Press
or
to select AV1 INPUT or AV2 INPUT, then press
ENTER
.
2
Press or to select AV, RGB or S-VIDEO.
AV:
Composite signal (e.g. from VHS-Video recorder).
RGB:
RGB signal (e.g. from DVD player with RGB output).
S-VIDEO:
S-Video signal (e.g. from DVD player with S-Video output).
Note:
When S-VIDEO is selected, the image will not be outputted from
(2)
(AV2) SCART socket. Only the sound will be outputted.
EXIT : END
MENU: RETURN
AV1 INPUT
AV
AV2 INPUT
AV
AV COLOUR
AUTO
RESET TV SETTING
AV
3
Press
EXIT
to return to the normal screen.
5. Connecting to a DVD player or other AV device with Component Video outputs
Y Pb Pr
Component output
Audio output
Video cable (not supplied)
Audio cable (not supplied)
To COMPONENT IN
TV
(
Left side view
)
If your DVD player (or other device) has Component Video output jacks, use a suitable set of cables
(RCA/Phono) to connect these to the Component Video inputs on this TV as shown - it can greatly enhance
the picture quality and performance. Please remember that you will also need to connect separate cables
(RCA/Phono) for the audio signals. Select the COMPONENT input mode (see page 11).
Note:
The Component Video input of this unit are for use with equipment which outputs interlaced signals (PAL:
576i/1080i or NTSC: 480i/1080i) and progressive signals (PAL: 576p/720p or NTSC: 480p/720p).
DVD player
Connection to other equipment
32L0141B_Eng.indd 35
32L0141B_Eng.indd 35
6/7/2007 9:21:22 AM
6/7/2007 9:21:22 AM
