English
- 35 -
English
Other Controls -
continued
Audio Description
Audio description refers to an additional narration
track for blind and visually impaired viewers of visual
media, including television and movies. The description
narrator talks through the presentation, describing
what is happening on the screen during the natural
pauses in the audio (and sometimes during dialogue,
if deemed necessary). You can use this feature, only if
the broadcaster supports that additional narration track.
•
Highlight
Audio Description
by pressing
Up
or
Down
button.
• Press
OK
button to enter Audio Description
submenu.
• Use
Up
or
Down
button to select Audio Description
setup and then press
Left
or
Right
button to set
this setting.
Auto TV Off
You can set the
timeout value of auto off feature. After
the timeout value is reached and the TV is not operated
for selected time, the TV will go off. Press
MENU
button
and select
Settings
by using
Left
or
Right
button. Press
OK
button to continue. Use
Up
or
Down
button to select
Other Settings
and then press
OK
button. Select
Auto
TV Off
using
Up
or
Down
button.
Standby Search (optional)
If the Standby Search is set to On and the TV is in standby
mode, the TV will look for any changes in the saved
channels. Press
MENU
button and select
Settings
by
using
Left
or
Right
button. Press
OK
button to continue.
Use
Up
or
Down
button to select
Other Settings
and
then press
OK
button. Select
Standby Search
using
Up
or
Down
button and use
Left
or
Right
button to set.
Bisskey
Biss is a satellite signal scrambling system that is
used for some broadcasts. If you need to enter BISS
key on a broadcast, you can use Biss Key setting.
Highlight Biss Key and press
OK
to enter keys on the
desired broadcast.
Store Mode
If you set
Store Mode
to
Enabled
, your TV’s
features will be illustrated on the top of the screen. To
deactivate this feature, set to
Disabled
.
Po
wer Up Mode
This setting configures the power up mode preference.
Standby:
The TV always powers up in Standby mode.
Last State:
The TV always switches on with the last
selected channel/source.
CEC
This function allows to control the connected HDMI-
CEC compatible devices with the remote control of the
TV. Press
Left
or
Right
button to enable the feature.
Select the HDMI input of the connected device from
the source menu. The TV remote is automatically
able to control most functions of the device (navigate
menus, change channels, launch the disc etc.).
To terminate this operation and control the TV via the
remote again, press and hold the “0-Zero” button on
the remote control for 3 seconds.
. It is also possible to disable this feature in the
configuration menu of the connected HDMI device.
Refer to the operating instructions of the related device.
CEC operation is available if a CEC device is present.
CEC Auto Power On
This function allows the connected HDMI-CEC
compatible device to turn on the TV and switch to its
input source automatically.
Press
Left
or
Right
button to enable or disable the
feature.
Note:
The audio device should support System Audio Control
feature and
CEC
option should be set as
Enabled
.
