Toshiba 24D1763DA, Руководство по эксплуатации

Страница: 15 / 31

English - 14 -
CEC and CEC RC Passthrough
This function allows to control the CEC-enabled
devices, that are connected through HDMI ports
by using the remote control of the TV.
The
CEC option in the System>Settings>More
menu should be set as
Enabled
at first. Press
the Source button and select the HDMI input of
the connected CEC device from the Sources
List menu. When new CEC source device is
connected, it will be listed in source menu with its
own name instead of the connected HDMI ports
name(such as DVD Player, Recorder 1 etc.).
The TV remote is automatically able to perform
the main functions after the connected HDMI
source has been selected.
To terminate this operation and control the TV via
the remote again, press Quick Menu button on
the remote, highlight the CEC RC Passthrough
and set as Off by pressing Left or Right button.
This feature can also be enabled or disabled
under the System>Settings>More menu.
The TV supports ARC (Audio Return Channel).
This feature is an audio link meant to replace
other cables between the TV and an audio system
(A/V receiver or speaker system).
When ARC is active, the TV does not mute its
other audio outputs automatically. You will need
to decrease TV volume to zero manually if you
wish to hear the ARC audio only (same as optical
or co-axial digital audio outputs). If you want to
change connected device’s volume level, you
should select that device from the source list.
In that case volume control keys are directed to
connected audio device.
Note: ARC is supported only via the HDMI1 input.
System Audio Control
Allows an Audio Amplifier/Receiver to be used
with the TV. The volume can be controlled
using the remote control of the TV. To activate
this feature set the Speakers option in the
System>Settings>More menu as Amplifier .
The TV speakers will be muted and the sound
of the watched source will be provided from the
connected sound system.
Note: The audio device should support System Audio
Control feature and
CEC
option should be set as
Enabled .