Toshiba 23PB200 Series Скачать руководство пользователя страница 5

– 5 –

3)  If the TV is dropped or the cabinet is broken, 

turn off  the TV and remove the power plug 
from the outlet immediately.

If the TV has power in this condition, it may cause 
a fi re or an electric shock. If the cabinet is broken, 
be careful when handling the TV to prevent an 
injury.
Contact a service technician for inspection and 
repair.

4)  When the TV reaches the end of its useful life, 

ask a qualifi ed service technician to properly 
dispose of the TV.

Cleaning

CAUTION: Avoid using chemicals (such as air 
refreshers, cleaning agents, etc.) on or near 
the TV pedestal. Studies indicate that plastics 
may weaken and crack over time from the 
combination eff ects of chemical agents and 
mechanical stress (such as weight of TV). Failure 
to follow these instructions could result in 
serious injury and/or permanent damage to TV 
and TV pedestal.

1)  Remove the power plug before cleaning.

Never use solvents such as benzine or thinner 

to clean the TV.

• 

 These solvents may distort the cabinet or 
damage its fi nish.

• 

 If rubber or vinyl products remain in contact 
with the TV for a long time, a stain may result.

If the cabinet becomes dirty, clean it with a soft, 
dry cloth.
When cleaning the surface of the LCD display, 
wipe the panel surface gently with a soft, dry 
cloth.

2)  Periodically disconnect the power plug from 

the outlet and check it.
If dust has collected on the power plug 
connectors, clean off  the dust with a dry cloth.

This dust may cause a fi re due to reduced 
insulation on the plug.

Important information

1)  About LCD screen

• 

 If you have the LCD screen facing to the sun, 
the LCD screen will be damaged. Be aware of 
locating the TV close to a window or outdoors.

• 

 Never press the LCD screen strongly or scratch 
it, and never put anything on it. These actions 
will damage the LCD screen.

2)  About cabinet and LCD screen

Never spray volatile compounds such as 
insecticide on the cabinet and LCD screen.
This may cause a discolouration or damage the 
cabinet and LCD screen.

3)  Some pixels of the screen do not light up

The LCD display panel is manufactured using an 
extremely high level of precision technology, 
however sometimes some pixels of the screen 
may be missing picture elements or have 
luminous spots. This is not sign of malfunction.

4) About Interference

The LCD display may cause interference in image, 
sound, etc. of other electronic equipment that 
receives electromagnetic waves (e.g. AM radios 
and video equipment).

5)  About using under the low temperature places

If you use the TV in the room of 0°C or less, 
the picture brightness may vary until the 
LCD monitor warms up. This is not a sign of 
malfunction.

6) About afterimage

If a still picture is displayed, an afterimage may 
remain on the screen, however it will disappear. 
This is not a sign of malfunction.

Exemptions

• 

 Toshiba is not liable for any damage caused by 
fi res, natural disaster (such as thunder, earthquake, 
etc.), acts by third parties, accidents, owner’s 
misuse, or uses in other improper conditions.

• 

 Toshiba is not liable for incidental damages 
(such as profi t loss or interruption in business, 
modifi cation or erasure of record data, etc.) caused 
by use or inability to use of product.

• 

 Toshiba is not liable for any damage caused 
by neglect of the instructions described in the 
owner’s manual.

• 

 Toshiba is not liable for any damage caused by 
misuse or malfunction through simultaneous use 
of this product and the connected equipment.

Trademark Information

• 

 HDMI, the HDMI logo, and High-Defi nition 
Multimedia Interface are trademarks or registered 
trademarks of HDMI Licensing LLC in the United 
States and other countries.

• 

MPEG Layer-3 audio coding technology licensed 
from Fraunhofer LLS and Thomson.

23293240PB200Series̲En.indd   5

23293240PB200Series̲En.indd   5

2012/10/04   14:55:48

2012/10/04   14:55:48

Содержание 23PB200 Series






























Отзывы: