No.
Part name
Procedures
1) Follow to the procedure in the item
.
2) Remove
the two screws used to secure the
bearing base.
3) R
emove the bearing base.
<Caution at assembling>
• If the bearing is out from the housing, push it
into the specified position and then
incorporate it in the main body.
Two screws
Bearing
Bearing base
Two
screws
Bearing
Bearing base
One
screw
One screw
4) Remove three fixing screw at the right
side of the heat exchanger, and separate
the heat exchanger from the back body.
Bearing
Evaporator
(Heat exchanger)
(Figure 5)
(Figure 4, 5)
(Figure 4)
n
o
– 9
8
–
FILE NO. SVM-10050
