Toshiba 22031020002961, Руководство по обслуживанию

Страница: 37 / 51

Service Manual , 2017-8
37 / 51
10.Circuit description
10.1 Power Supply
The AC input power is reduced in voltage by SMPS control chip and filtered off wave by the
inductance-capacitance filter, then output the DC 12V power which will mainly power the relay
that controls strong current. Relay is used to control the strong current loaded switches of
compressor and defrost heater. The DC 12V power will output stable 5V electricity after passing
through the adjustor 7805, to power for the main control chip and thus monitor the temperature
changes in refrigerator.
10.2 Door trip test circuit(None)
The door switch input circuit is used to detect the refrigerator door open or not the circuit module.
Chip I/O PORT port. by testing the continuous high level + 5V to determine whether the door is
open. And then drive the relevant load
10.3 Temperature test circuit
Its conducted by the sensor, making use of the characteristics that resistance value reduces as the
temperature increases, and the thermistor that has temperature coefficient of resistance in medium
temperature.