Toshiba 20V300P, Руководство пользователя

Страница: 19 / 148

English
19
Input selection and
AV connections
19
Defining the INPUT sockets so that the television recognises connected equipment. See page 7 for a clear
view of the back connection recommendations.
Most media recorders and decoders send a signal
through the SCART lead to switch the television to the
correct
Input socket.
Alternatively press the external source selection button
B
until the picture from connected equipment is shown.
An S in the display e.g.
B
2S ( EXT 2S ), indicates the
input is set for an S-Video signal.
Use the Input Selection if the television does not switch
over automatically.
Input selection
1
At any time by pressing OK a list will appear on
screen showing all stored programmes and
external equipment
. Use up and down to
highlight and OK to select.
This specifies the type of signal going into SCART 2 ( EXT2 )
on the back of the television. Please refer to the
manufacturers instructions for the connected equipment.
In the SET UP menu press down until
EXT2 input is highlighted, then press OK .
With left or right select either CVBS (video) or
S-VIDEO as the required input for EXT2 .
If the colour is missing try the alternative setting.
INPUT signal selection
1
2
S E T U P
L a n g u a g e E n g l i s h
C o u n t r y
U K
A u t o t u n i n g
OK
M a n u a l t u n i n g
OK
Pr o g r a m m e s o r t i n g
OK
P i c t u r e p o s i t i o n OK
E X T 2 i n p u t C V B S
M E N U B a c k E X I T Wa t c h T V
PC displays a computer connected to Input
RGB/PC on the back of the television.
02 BBC2
01 BBC1
PC
B 3
B 2
B 1
05
04
CH4
g p g