13
Appendix
Using the
TV
’s
Features
Setting up
y
our TV
Using the
Remote Contr
ol
Connecting
y
our TV
W
elcome to
T
oshiba
Impor
tant
Saf
eguar
ds
Adding channels to the TV’s memory
Your TV will stop on specific channels that are stored in the TV’s
channel memory when you press C or –. Use the steps below
to set all active channels in your area automatically.
Programming channels automatically
Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory auto-
matically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press
a
or
b
to display the SETUP menu.
2. Press
c
or
d
until the TV/CABLE
selection is highlighted.
3. Press
a
or
b
to highlight either TV
or CABLE, depending on which
you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
d
to select CH PROGRAM.
5. Press
a
or
b
to start channel programming. The TV will automati-
cally cycle through all the TV or Cable channels (depending on
which you selected), and store all active channels in the channel
memory.
While the TV is cycling through the channels, the message
“PROGRAMMING NOW-PLEASE WAIT” appears.
6. When channel programming is complete, the message “COMPLETED”
appears.
7. Press CH + or – to view the programmed channels.
Adding and erasing channels manually
After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If adding channels, you must select the channel to add using the
Channel Number buttons.
2. Press MENU, then press
a
or
b
to
display the SETUP menu.
3. Press
c
or
d
to highlight ADD/
ERASE.
4. Press
a
or
b
to select ADD or
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.
Changing channels
To change to the next programmed channel:
Press Channel
▲
or
▼
on the TV or CH + or – on the remote
control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
Menu
PICTURE AUDIO
SETUP
OPTION
CH
CH PROGRAM
ADD / ERASE
START
ADD
SELECT
ADJUST
TV / CABLE
TV CABLE
PICTURE AUDIO
SETUP
OPTION
CH
CH PROGRAM
START
SELECT
ADJUST
TV / CABLE
CABLE
ADD / ERASE
ADD ERASE
C/–
Channel
Numbers
Setting up
your TV
c d a b
J3S00721A(E)_P07-13
26/12/05, 2:16 PM
13
