– 6 –
GENERAL ADJUSTMENTS
SPECIFIC INFORMATIONS
SERVICE MODE
1. ENTERING TO SERVICE MODE
3) While pressing the
o
button,
press MENU button on TV set.
2) Press
o
button again to
keep pressing.
2. DISPLAYING THE ADJUSTMENT MENU
1)
Press MENU button on TV.
3. KEY FUNCTION IN THE SERVICE MODE
The following key entry during display of adjustment menu provides special functions.
A single horizontal line ON/OFF:
- / - - button (on Remote) or
a
button (on TV)
Test signal selection :
a
button (on Remote)
Selection of the adjustment items :
CHANNEL
s
/
t
(on TV & Remote)
Change of the data value :
VOLUME
;
+/– (on TV & Remote)
Adjustment menu mode ON/OFF :
MENU button on TV
Initialization of the memory (QA02) :
CALL + CHANNEL button on TV (
s
)
Reset the count of operating protect
circuit to “00”:
CALL + CHANNEL button on TV (
t
)
“RCUT” selection :
1 button
“GCUT” selection :
2 button
“BCUT” selection :
3 button
“CNTX” (or “SCNT”) selection :
4 button
“COLC” selection :
5 button
“TNTC” selection :
6 button
Test audio signal ON/OFF (1kHz) :
8 button
Self diagnostic display ON/OFF :
9 button
1) Press
o
button once on
Remote Control.
Adjustment mode
Item
Data
Service mode
S
Press
Press
ITEM
DATA
Color thickness correction
note: Displayed differently as shown below, de-
pending on the setting of the receiving color
system.
COLP (PAL)
COLC (NTSC)
COLS (SECAM)
CAUTION : Never try to perform initialization unless you have changed the memory IC.
S
(Service mode display)
Item
Data
