28
DISPLAY
Press
DISPLAY
to display the current information on the
screen.
When the TV/DVD
receives a digital signal,
the digital information
will appear.
62-001 HDTV Moving Picture1
CH-1
Digital Air
No Program Information is available
Sleep Timer
Off
English
Mono
Full
480i
Channel number
• Station name
Channel label (if preset)
• Broadcast program name
V-Chip rating
• Signal type
Sleep timer
• Audio language
Program guide
• Picture size
Resolution
•
•
•
•
•
•
When the TV/DVD
receives a analog signal,
the analog information
will appear.
14
Analog Cable
Sleep Timer
Off
Mono
Full
480i
Channel number • Channel label (if preset)
V-Chip rating
• Signal type
Sleep timer
• Audio information (Stereo, SAP or Mono)
Picture size
• Resolution
Press
DISPLAY
again to clear the call display.
•
•
•
•
Note:
After a few seconds, DISPLAY screen will return to
normal TV-operation automatically.
•
CH RTN
This button allows you to go back to the last channel
selected by pressing
CH RTN
. Press
CH RTN
again to
return to the last channel you were watching.
MUTE
Press
MUTE
to switch off the sound. The TV/DVD’s
sound will be silenced and “Mute” will appear on the
screen. The sound can be switched back on by pressing
this button again or the
VOL +
or
–
.
TV operation (continued)
SLEEP
To set the TV/DVD to
turn off after a preset
amount of time, press
SLEEP
on the remote
control. The clock will
count up 10 minutes for
S l e e p T i m e r
0 h 1 0 m
each press of
the
SLEEP
button (Off, 0h 10m, 0h 20m,
..., 2h 0m). After the sleep time is programmed, the
display will appear briefly every ten minutes to remind
you that the sleep timer is operating. To confirm the
sleep timer setting, press
SLEEP
and the remaining
time will be displayed for a few seconds. To cancel the
sleep timer, press
SLEEP
repeatedly until the display
turns to Off.
HEAD PHONES (except 26LV61K)
Insert a stereo headphones (not supplied) with a 1/8” mini
plug into the HEAD PHONE jack on the rear panel.
If you connect headphones, the sound from
TV/DVD
speakers is muted.
DISPLAY
CH RTN
VOL +/–
SLEEP
MUTE
TV operation
TV operation (Continued)
29
TV operation
Labeling channels
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Channel” menu, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Press or to select “Ch Label”, then
press or ENTER.
The “Ch Label” menu will appear.
: Select
ENTER:Set
Channel
Add/Delete
>>
DTV Signal
>>
>>
Auto Ch Memory
Ch Label
>>
3
Press or to select a channel you want to
label, then press .
Ch Label
Label Clear
>>
: Adjust
Ch Label
Channel Number
15-1
: Select
4
Press or repeatedly until the character
you want appears in the first space.
Label Clear
>>
: Adjust
Ch Label
Channel Number
15-1
: Select
Ch Label
A
ENTER:Set
The characters rotation as follows:
SPACE
- , () @ / + = -
If the character which you desire appears, press
ENTER
.
Repeat this step to enter the rest of the
characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
5
When you finish inputting the label name,
press EXIT/CANCEL to return to the normal
screen.
6
Repeat steps 3-5 for other channel. You can
assign a label to each channel.
To clear a Ch Label
After step 3 above, press or to select “Label Clear”,
then press or
ENTER
.
Note:
The channel labels will be reset after “Automatic
Search” on page
24
.
•
Labeling channels
Channel label appear with the channel number display each time you turn on the
TV/DVD, select a channel, or press DISPLAY.
You can choose any four characters to identify a channel.
/ / /
MENU
EXIT/CANCEL
ENTER
TV operation
30
Labeling video inputs
The Video Label feature allows you to label each input source for your TV/DVD.
/ / /
MENU
EXIT/CANCEL
ENTER
Labeling video inputs
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Setup”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Press or to select “Video Label”, then
press or ENTER.
Video Label
>>
Auto Shut Off
Off
On
Aspect
Reset
>>
Setup
Closed Caption
>>
Language
English
: Select
ENTER:Set
3
Press or to select an input which you
want to label.
ColorStream HD
-
HDMI
-
Video Label
: Adjust
: Select
Video
-
Video 2
-
ColorStream HD
-
HDMI 1
-
HDMI 2
-
Video Label
: Adjust
: Select
Video 1
-
4
Press or to select the desired label for
that input source.
HDMI
-
Video Label
: Adjust
ColorStream HD
SAT
: Select
Video
-
–
: Uses the default label name
VCR
: Video cassette recorder
DVD
: DVD video
DTV
: Digital TV set-top box
SAT
: Satellite box
CBL
: Cable box
HD
: HDMI (only for HDMI input)
5
Press EXIT/CANCEL to return to the normal
screen.
(26LV61K only)
TV operation
31
Setting the V-Chip
An age limitation can be set to restrict children from viewing or hearing
violent scenes or pictures that you may choose to exclude. The restriction
applies to “TV Rating” and “Movie Rating” if this data is transmitted. You may
set this restriction separately. To use the V-Chip function, you must register
a password.
0–9
/ /
MENU
ENTER
To register a password
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Lock”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Select and enter your password (4 digits)
using Number buttons (0-9), then press
ENTER.
[0-9]
Lock
: Select
ENTER:Set
New Password
----
3
Enter the same password again to confirm,
then press ENTER.
The password is now registered.
[0-9]
Lock
: Select
ENTER:Set
Confirm Password
----
1
Press MENU in the TV mode. The TV menu
screen will appear. Press or to select
“Lock”, then press or ENTER.
Picture
Audio
Channel
Lock
Setup
Main Menu
: Select
ENTER:Set
2
Use Number buttons (0-9) to enter your pass-
word, then press ENTER. Then Lock menu will
appear.
[0-9]
Lock
: Select
ENTER:Set
Password
----
3
Press or to select “Change Password”,
then press or ENTER.
The Change Password screen will appear.
4
Enter a new password using Number buttons
(0-9), then press ENTER.
Enter the same password again to confirm,
then press ENTER.
The new password is now registered.
[0-9]
Change Password
Confirm Password
: Select
ENTER:Set
New Password
----
----
To change a password
Notes:
If you forget the password, press
DISPLAY
four times within
ve seconds while the TV is in password entering mode. This
allows you to reset your password.
Note:
The V-Chip feature is available only for the U.S. V-Chip
system. The Canadian V-Chip system is not supported.
•
DISPLAY
