background image

5

10) Precautions for installing on outdoor 

antenna

An outside antenna system should not be 
located in the vicinity of overhead power lines, 
or other electric light or power circuits.
If the antenna falls down or drops, it may 
cause an injury or an electric shock.

Use

1) Never place hot objects or open fl ame 

sources, such as lighted candles or 
nightlights, on or close to the TV.

High temperatures can melt plastic and lead 
to fi res.

2) The apparatus shall not be exposed to 

dripping or splashing and that no objects 
fi lled with liquids, such as vases, shall be 
placed on the apparatus.

When liquids are spilled or small items are 
dropped inside the TV, this may cause a fi re or 
an electric shock.
If small objects drop inside the TV, turn off the 
TV and remove the power plug from the outlet 
immediately and contact a service technician.

3) Never insert objects (metal or paper) 

or pour water inside the TV through 
ventilation holes and other openings.

These items may cause a fi re or an electric 
shock. If these objects are inserted inside the 
TV, turn off the TV and remove the power plug 
from the outlet immediately and contact a 
service technician. Be especially careful that 
children do not insert objects in the TV.

Clip

4) Never stand or climb on the TV.

Be especially careful in households with 
children to prevent them through climbing on 
top of the TV. It may move, fall over, break, 
become damaged or cause an injury.

5) When the TV will not be used for a long 

period of time, such as during vacation or 
travel, remove the power plug from the wall 
outlet for safety.

•  The TV is not completely disconnected from 

the power supply line, as minute current is 
consumed even when the 

!

 Power switch 

is turned off.

•  The Mains plug or an appliance coupler is 

used as the disconnect device, therefore 
the disconnect device shall remain readily 
operable.

Introduction

1926AV550ETY_EN.indd   5

1926AV550ETY_EN.indd   5

10/20/2008   1:31:09 PM

10/20/2008   1:31:09 PM

Содержание 19AV550E





































Отзывы: