Toshiba 15V300PG, Руководство пользователя

Страница: 7 / 24

English - 7 -
Connecting external equipment continued,
Aerial cables:
Connect the aerial to the socket on the rear of the televi-
sion. If you use a decoder and/or a media recorder it is
essential that the aerial cable is connected through the
decoder and/or through the media recorder to the televi-
sion.
SCART leads:
Connect the media recorder IN/OUT socket to the televi-
sion. Connect the decoder TV socket to the television.
Connect the media recorder SAT socket to the decoder
MEDIA RECORDER socket.
Before running APS (AUTO PROGRAMMING SYSTEM) put
your decoder and media recorder to Standby.
A wide variety of external equipment can be connected to
the back of the television, therefore the relevant owners
manuals for
all additional equipment must be referred to.
If connecting S-VIDEO equipment, set the INPUT for
S-VIDEO. See page 15 .
If the television automatically switches over to monitor
external equipment, return to normal television by pressing
the desired programme position button. To recall external
equipment, press
to select between TV, EXT1,
EXT2, S-Video or PC RGB.
Connecting the PC via PC input
• Power off both computer and TV before making any con-
nections.
• Connect the PC cable to the PC input of your TV and to the
15-pin connector on the rear of your computer.
• Tighten the screws on the plugs until the connectors are
fastened securely.
• For PC sound, use stereo jack socket located at the rear
side of the TV.