57
Chapter 8: Basic disc playback
Removing a disc
Disc playback reminders
•
If the TV/DVD does not operate properly, static
electricity build-up may be the cause. Turn off the
TV/DVD, then disconnect the power cord from
the AC outlet. Reconnect the power cord, then
press
POWER
to turn on the TV/DVD
again.
•
If an incompatible disc is loaded, one of the
following error messages appears on-screen:
“Incorrect Disc”, “Disc region incorrect” or
“Enter Password”. If this is the case, check your
disc again. Go to Page 8 for a list of supported
disc formats, and to Page 76 for playback-related
troubleshooting instructions.
•
In some instances the TV/DVD may take a
minute or so to start disc playback.
•
When you load a disc with the playback side
facing backward, “Reading” appears on-screen
but it will be replaced by “Incorrect Disc”. Eject
the disc and load it again making sure the
playback side is now facing forward.
•
The playback resume function may not work on
some discs.
•
Some DVDs may have fixed playback operations
designed by the DVD manufacturer. Your TV/
DVD follows this fixed playback design. In such
cases, some playback features may not be
available. You may refer to the instructions
accompanying the DVD.
•
Do not put any objects other than compatible
discs on the disc slot. Doing so may cause damage
to the TV/DVD.
•
There may be a few seconds between the action of
pressing a button and the function it activates.
Playback navigation
Playing in fast reverse or fast
forward direction (DVD/VCD/CD)
To resume normal playback:
Press .
Note:
•
The sound is muted during reverse and
forward scan.
•
The playback speed may differ depending
on the disc.
•
You can use fast reverse/fast forward
playback for MP3, and WMA CDs.
Playing frame by frame (DVD/VCD)
To resume normal playback:
Press .
Note:
•
The sound is muted during frame by frame
playback.
Playing in slow motion (DVD/VCD)
To resume normal playback:
Press .
Note:
•
The sound is muted during slow motion
playback.
1
Press
EJECT
on the TV control panel or
on the remote control.
2
Wait for the disc to be ejected and then remove
the disc from the slot.
1
Press
REV
or
FF
during playback.
REV
: Fast reverse playback
FF
: Fast forward playback
Each time you press
REV
or
FF
, the
playback speed changes.
1
Press
during
playback.
Each time you press
, the picture advances
one frame.
1
Press
SLOW
or
SLOW
during
playback.
SLOW
: Slow reverse playback
SLOW
: Slow forward playback
Each time you press
SLOW
or
SLOW
,
the slow motion speed changes.