background image

TOSHIBA

i

NOTE

These instructions are not intended to cover all of the details or variations in

equipment, nor to provide for every possible contingency to be met in connection

with installation, operation, or maintenance. This manual may change without

notice. Contact your local Toshiba sales office to verify that this is the latest

revision. Should further information be desired or should  particular problems arise

which are not covered sufficiently for the purchaser's purposes, the matter should

be referred to the local Toshiba sales office.

The contents of this instruction manual shall not become a part of or modify any

prior or existing agreement, commitment, or relationship. The sales contract

contains the entire obligation of Toshiba International Corporation's UPS Division.

The warranty contained in the contract between the parties is the sole warranty of

Toshiba International Corporation's UPS Division and any statements contained

herein do not create new warranties or modify the existing warranty.

UNINTERRUPTIBLE POWER SUPPLY

Please complete the enclosed Extended Warranty Card and return it by prepaid mail

to Toshiba. This activates the extended warranty. If additional information or technical

assistance is required call Toshiba's marketing department toll free at

1-800-231-1412 or write to: Toshiba International Corporation, 13131 W. Little York

Road, Houston, TX 77041-9990.

Please complete the following information for your records and to remain within this

equipment manual:

Model Number:

Serial Number:

Date of Installation:

Inspected By:

Содержание 1400 XL PLUS Series



















Отзывы: