Toshiba 13A23, Руководство пользователя

Страница: 9 / 17

9
ENGLISHENGLISH
TO MEMORIZE CHANNELS
This TV is equipped with a channel memory feature that allows the
TV to skip up or down to the next channel set into memory, skip-
ping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s
memory. In addition to normal VHF and UHF channels, this TV can
receive up to 113 Cable TV channels. To use this TV with an
antenna, set the TV/CABLE menu option to the TV setting. When
shipped from the factory, this menu option is in the CABLE setting.
TV/CABLE SELECTION
Press MENU.
Press SET + or – until the indicator next to
“CH SETUP” begins to flash, then press
ENTER.
Press SET + or – until the indicator next
to “TV/CABLE” begins to flash.
Press ENTER to select the TV or CABLE
mode. The arrow indicates the selected
mode.
Press MENU repeatedly until the
MENU screen is cleared.
NOTE:
Contact your cable company to determine the type of cable
system used in your area.
Press MENU repeatedly until the MENU screen is
cleared.
TO ADD/DELETE CHANNELS
Press MENU.
Press SET + or – until the indicator next to
“CH SETUP” begins to flash, then press
ENTER.
Press SET + or – until the indicator
next to “ADD/DELETE” begins to flash,
then press ENTER.
Select the desired channels to be
added or deleted using the Direct
Channel Selection buttons (0-9), CH +
or – or SET + or –.
1
2
3
4
5
4
1
2
3
4
5
Press ENTER to select ADD or DELETE.
If an unmemorized channel was selected (step 4), the
channel indication will be red. Press ENTER if you wish
to ADD the unmemorized channel. The channel indica-
tor will change from red to green when a channel is
added and the channel will be memorized.
If a memorized channel was selected (step 4), the chan-
nel indication will be green. To delete the channel from
Press MENU repeatedly until the MENU screen is
cleared.
6
memory, press ENTER repeatedly until
“DEL” appears on-screen. The channel
indicator will change from green to red
when a channel is deleted. Repeat
Steps 4 and 5 for each channel to be
added or deleted.
MENU
〈 + / Ð / ENTER / MENU 〉
PICTURE
LANGUAGE
V-CHIP SET
LOCK
CH SETUP
ON TIMER
ADD CH 012
〈
0 – 9 / + / – / ENTER / MENU
〉
MENU
〈 + / Ð / ENTER / MENU 〉
PICTURE
LANGUAGE
V-CHIP SET
LOCK
CH SETUP
ON TIMER
AUTOMATIC CHANNEL MEMORY
Press MENU.
Press SET + or – until the indicator next to
“CH SETUP” begins to flash, then press
ENTER.
1
2
MENU
〈 + / Ð / ENTER / MENU 〉
PICTURE
LANGUAGE
V-CHIP SET
LOCK
CH SETUP
ON TIMER
Press SET + or – until the indicator next
to “AUTO CH MEMORY” begins to flash,
then press ENTER. The TV will begin
memorizing all the channels available in
your area. Channel numbers will remain
red until auto memorizing is complete.
3
ADJUSTING THE PICTURE
You can adjust the settings for color, sharpness, contrast,
brightness and tint.
1
2
4
Press SET + or – to adjust the setting.
CONTRAST COLOR BRIGHTNESS TINT SHARPNESS
3
Press MENU.
Press SET + or – until the indicator next to “PICTURE”
begins to flash, then press ENTER.
Press ENTER repeatedly to select the item you want to
adjust.
TO RETURN TO INITIAL SETTING:
Press RESET while the picture adjusting mode appears
on-screen.
BRIGHTNESS
CONTRAST
COLOR
TINT
SHARPNESS
+
increase brightness
increase contrast
brilliant color
greenish color
decrease brightness
decrease contrast
pale color
reddish color
makes picture softer
makes picture sharper
–
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
〈
+ / — / ENTER / MENU
〉
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
〈
+ / — / ENTER / MENU
〉
AUTO CH MEMORY
TV
ADD / DELETE
CABLE
〈
+ / — / ENTER / MENU
〉
3M10501A-E P08-12 5/3/03, 12:40 PM 9