Toshiba 13A23 Скачать руководство пользователя

Страница: 8 / 17

DIRECT CHANNEL SELECTION buttons (0-9) - Press
these buttons to select a channel. The channel number will
appear on the upper right corner of the TV screen. If an
invalid channel number is selected, the display will revert to
the previous channel.

TV MODE DIRECT CHANNEL SELECTION - When the
TV/CABLE menu option is in the TV position, all channels
can be instantly selected by using two buttons (For example,
to select channel 2, press “0,” then “2.” If you press only “2,”
channel selection will be delayed for a few seconds). For
channels 10 and above, press the two digits in order.

TV - VHF/UHF channels
CABLE - CABLE TV channels

To turn on the TV, press POWER.

The VOLUME can be adjusted to a desired level by
pressing VOL (VOLUME) + or –.

The sound level will be indicated on the TV screen by
GREEN BARS AND A NUMBER. As the sound level
increases, so do the number of BARS AND THE
NUMBER on the screen. The same is true for decreas-
ing the level.

Set the TV/CABLE menu option to the appropriate
position. When shipped from the factory, this menu
option is in the CATV setting. See “TO MEMORIZE
CHANNELS” on page 9.

TV OPERATION

CABLE mode direct channel selection
When the TV/CABLE menu option is in the CABLE position,
channels can be selected as follows:

1-9

10-12

13-99

100-125

Press “0” twice, then 1-9 as needed.
Example, to select channel 2, press
“002.”
Press “0”, then remaining 2 digits.
Example, to select channel 12, press
“012.”
Press the 2 digits in order.
Example, to select channel 36, press
“36.”
Press the 3 digits in order.
Example, to select channel 120, press
“120.”

CH (CHANNEL) + and – buttons
Press and release CH (CHANNEL) + or –. The
channel automatically stops at the next channel set
into memory. Press and hold the button down to
change channels more quickly.

For proper operation, before selecting channels,
they should be set into the TV's memory.
See “TO MEMORIZE CHANNELS

” on page 9.

SETTING THE LANGUAGE

This TV can display the on-screen displays and adjustment menus in English, Spanish, or French.
On-screen language selection (step 3) will automatically appear on the screen when you press the MENU button initially. Select
the language you prefer first, then proceed with the other menu options.

NOTE:
If Spanish or French is chosen, the Closed Caption indicators will be in the selected language, but the Closed Caption text
will not be affected by the language selection.

Press SET + or – until the “

”

indicator points to the desired
language: English (ENGLISH),
Spanish (ESPAÑOL) or French
(FRANCAIS), then press ENTER.

Press MENU.

Press SET + or – to select the
LANGUAGE mode, then press
ENTER.

Press MENU repeatedly until the
MENU screen is cleared.

NOTE: If the station being viewed stops broadcasting, the TV

will automatically shut off after 15 minutes.

CH SETUP

PICTURE

LANGUAGE

V-CHIP SET