Page 7
AVR Software - Menu Selections (continued)
AVR Setup
This screen allows the user to configure
two AVR parameters.
1. Shutdown on Low or High line
voltage.
(The factory default is YES –
to shut down in case of fault
conditions.) Unselecting this button
will override, and the AVR will remain
on even if voltage drops or rises beyond
the acceptable range.
2. LCD Display.
Always ON is the
default setting. If you don’t want the
display on all the time, you can select a
time from 0 to 255 seconds. When
you have made your selections, press
SAVE SETUP.
Email Fault Alert Notification
In the unlikely event your AVR
experiences an issue the AVR will shut
down and send an email notification if
this section is configured. After
entering the configuration parameters
use the ‘Send Test Email’ button to
confirm your settings are correct.
Set Password
If you wish to change the password, use
this screen.
In case your forget your new
password,
you can restore the AVR to
factory default password by pressing
the button on the front of the AVR unit
and HOLDING it down for at least 10
seconds. The default password is
avr
www.TorusPower.com
Owner’s Manual
AVR
Audio / Video Power Isolation Units
Rack Mount (RK) / Consumer (C)
04/12
Power Conditioners
™
REV.04/19/2012
