Torrot KIDS10/12, Руководство по ремонту

Страница: 11 / 20

11 of 20 www.torrotelectric.com Rev. 1.0
REPAIR MANUAL
KIDS10/12
fdsafasdfasdf
R
Dual map button does not work Connection error in the switch.
Check connections of the dual map switch.
Replace defective parts.
Dual map switch defective
Check the continuity in the switch. Replace if
necessary.
Programming error.
Programme a parameter set in the controller.
Restart the controller and check the function.
The controller does not supply
voltage to the dual map switch
Disconnect the switch. Check that there is the
necessary voltage in the supply line of the
switch.
When the charger is connected the
indicator light stays green.
Battery is fully charged
Check the battery voltage. If fully charged it
will not accept any more charging.
Wiring error
Check that there is battery voltage in the
circular chassis connector and in the battery
charging connector. Replace defective parts.
The battery is defective
Follow the instructions of the battery check.
Replace battery if necessary.
It is not possible to programme the
controller.
The controller is not supplied with
power and in position Start.
Check all steps of the initial section. Keep the
motor activated in order to programme.
Wrong connection cable
Check that the connection cable is in good
condition and correctly connected and
installed on your PC.