Torrey PPC 10/20, Руководство пользователя

Страница: 9 / 16

The scale can operate with an ac/dc power supply, or with battery (6 Volts
included). The battery is rechargeable using the ac/dc power supply and the
procedure is the following:
Recharge: to make this operation, just connect the scale to ac/dc power
supply for a period of time approximate to 10 hours with the scale turned
off, when you recharge the battery for some hours, but the battery can not
get enough charge to turn on the scale, then you must change the battery
by a new one. In this case you can contact to your authorized distributor.
The charge capacity of the rechargeable battery in this scale decreases
according, to the number of charge/discharge cycles, this causes that the
service life is reduced to 1000 cycles. For this reason the warranty period
for the battery is limited to six months after the purchase date of the scale.
Use of the batter y
If the battery does not have enough energy to keep
the scale operating for a long time, a low battery
indicator appears in the view finder. This is the first
warning signal indicating that it is necessary to
recharge the battery.
Even with this signal, it is possible for the scale to
keep on operating for a short period of time
(30 minutes), but after a second warning signal
appears ("low bat") in the view finder, the scale stops
itself and does not respond to the instructions.
Low battery indicator
To eliminate any of the two indicators and continue using the scale without
any concern, connect the ac/dc power supply to the scale and remember to
recharge the battery.
Auto Off Function
This function is permanently activated when the scale is turn on and only
when you do not have the ac/dc power supply connected to the scale. When
you do not use the scale for a period of time approximate to 15 minutes, it
will automatically turn off. To turn on the scale again, just press the key.
The power off timer function permit you to save electricity and avoid
constant battery recharge.
Portioning scale
9