50
180
3
190
150
170
160
6
130
140
120
90
110
100
40
30
10
70
60
20
80
1
2
4
5
7
200
4
CAUTION:
More than one person is required to
assemble this unit. Do not attempt to assemble
by yourself.
Unpacking the Equipment
This product may be packaged and shipped in
•
multiple boxes. Parts from all of the boxes are
required for various steps during the assembly
process.
Carefully open each box and arrange all the
•
parts near the area where assembly is to take
place.
CAUTION:
Use extreme care when cutting
•
plastic tie wraps and package banding. A wire
cutter works best for protecting yourself and
the parts.
CAUTION:
Some of the internal boxes may
•
contain upholstery. Do not use a utility knife to
open any boxes or the pads may be damaged.
The hardware is packed in bags. Carefully
•
open each bag and sort them per parts list on
the next page.
Before starting assembly, identify each part
•
and hardware item as listed in the parts list on
the next page. If any items are missing,
contact Torque Fitness Customer service at:
763-754-7533 (8:30 am - 5:00 pm CST). or 1-
877-TORQUE5 (1-866-664-9894).
[email protected]
Note:
Some items listed in the parts list may
•
already be pre-installed on the product.
Tools Required
Rubber mallet or hammer
•
3/4" wrench
•
Ratchet with 3/4" socket
•
3/8" Allen wrench
•
Allen wrench set
•
Wire snips (to cut plastic tie wraps)
•
Scissors or utility knife (to cut hardware bags)
•
Step stool or ladder
•
Tape measure
•
Optional Equipment
Optional equipment may be available for this
•
product.
Follow the instructions included with the
•
optional equipment to assemble it to the base
product.
Assembly Tips
In a continual effort to improve our products,
•
specifications are subject to change.
A 6" scale is provided at the bottom of every
•
page. To correctly measure the bolts, measure
from underneath the bolt head to the end of the
bolt as illustrated below.
Read all notes on each page before beginning
•
that step.
Some of the items shown in the assembly
•
steps may already be pre-assembled.
Assembly Tips Continued
Note:
Some items have been hidden for
•
assembly clarity.
Note:
Some pre-assembled parts may need to
•
be temporarily removed in order to complete the
step. Follow the instructions or damage to the
product could occur.
Some parts may have extra holes that will not be
•
used. Use only the holes depicted in the
instructions.
Certain parts make reference to the right and left
•
side of the machine. For this product, left and
right is determined by
facing
the product.
Provide ample space around the product for
•
ease of assembly.
DO NOT
fully tighten any connections until
•
instructed to do so. This will help insure that the
alignment of all of the parts will be correct.
Insert all bolts in the direction indicated in the
•
instructions. Failure to do so may result in
clearance issues and will degrade the aesthetics
of the product.
Carefully follow instructions for all pivot points.
•
In general, primary rotating parts have
connections that should be securely tightened,
while secondary connections need to be loosen
1/4 turn.
GENERAL NOTES
