manualshive.com logo in svg

Torque Fitness tq9, Руководство по сборке и обслуживанию, Страница: 47 / 52

Поделиться
Скачать
Torque Fitness tq9 Скачать руководство пользователя страница 47

(THIS CHECKLIST MUST BE FILLED OUT IN ITS ENTIRETY AND LEFT WITH THE OWNER)

Product Serial Number _______________________________ Date Assembled _____________

Authorized Dealer _________________________ Assembler(s) __________________________

POST ASSEMBLY ADJUSTMENTS / CHECKS:

_______

Ensure ALL connections are tightened according to the instructions.

_______

Cable Tension Adjustment (see step 33): ensure that the head plate rests on the first weight plate yet there is not a lot of slop in the cable system. If
the head plate is not resting on the first plate or if there is too much cable slop in the system you can adjust cable tension in the following places (in
sequential order):

1.

Where the threaded end of the Weight Stack Cable (56) attaches to the Head Plate (80) (step 21 & 24).  Thread cable end in until Dual
Floating Pulley (1) rests against the base but the Head Plate still rests on the first weight plate.

2.

Where the Floating Pulley Cable (55) threads into the 3-1/2” Floating Pulley Guides (27). (step 26)

_______

Ensure all adjustments are smooth and easy and that all pull pins easily engage and disengage in all of the adjustment holes.

_______

Ensure cables are routed according to instructions and are not rubbing on cable retaining clips or retaining bolts. If when using, it feels like there is
cable drag, it is most likely that a cable retaining clip is out of position and the cable is rubbing on it or the cable has been routed incorrectly and is
riding on top of a cable retaining bolt. Also, loose pulley connections can make travel feel rough, check that all pulley connections are tight. Check all
areas where this applies. The product should work very smoothly.

_______

Make sure Weight Stack Cable is running in front of the bolts in the Leg Curl/Ext Frame (57). (step 24) and that Swivel Pulley Cable (53) is running
behind the bolts in the Front Upright (20).  (step 28 & 30)

______

Ensure  the Torque Fork™ weight adjuster easily fits in-between each of the weight plates.

Assembly Checklist

Page 47

Hybrid

TM 

Strength Technology Gym System

Содержание tq9





















































Отзывы:

Нет отзывов