50
51
Deutsch
English
Deutsch
English
• In case you don‘t use the battery with Torqeedo products and cable
sets, please use suitable cable cross-sections for connecting the
equipment (risk of fire).
• Torqeedo cable sets always contain a main switch and suitable fuse.
In case you should not use Torqeedo cable sets for electrical
installation, always use a main battery switch approved for switching
current and equipped with a fuse.
• Prior to connection, proceed to cleaning of all contacts.
• Make sure that all of the equipment is switched off during installation.
This also applies to chargers if these have already been connected.
• When connecting the equipment to Power 26-104, make sure that
only appropriate cable lugs or eyelets are used.
• Make sure that all connections are firmly tightened.
• Make sure of proper polarity when connecting equipment and char-
gers. As far as Torqeedo cable sets (and most common cable sets)
are concerned, positive cables are red and negative cables are black.
Assignment of battery terminals (positive and negative) is indicated on
top of the battery.
• First connect positive, then negative cable.
• Secure Power 26-104 against slipping and tilting. Only mount battery
in a horizontal position, grips directed upwards.
• Do not place or put anything on the battery.
4.2 Connecting Power 26-104 to Torqeedo Cruise outboard motors
For connection of Power 26-104, please observe instructions in operating manual
of Cruise outboards.
Be sure to use only the most current version of the operating manual. Current user ma-
nuals are available from www.torqeedo.com.
4.3 Startup with third party equipment – individual batteries
ON/OFF switch
When not operating Power 26-104 battery with Cruise outboards, an ON/OFF switch
will be necessary to enable / disable the battery. The switch is available as accessory
(part No. 2304-00).
ON/OFF switch comprises the actual switch as well as a negative bridge and shall be
mounted as explained hereinafter.
Please find mounting details in ON/OFF switch operating manual which is included to
the switch and also accessible under www.torqeedo.com.
In case of using two or more batteries the negative bridge must be always connected to
the most negative minus (the minus which is closest to the outboard minus).
parallel
serial
Load
Load
data cable
power cable
