54
Deutsch
English
5. Charging via charging channel
5.1 General remarks
5.2 Connecting charger to Power 24-3500
Connect charger terminal of red cable to positive pole and terminal of black cable to
negative pole of battery first. Then connect charger to the wall socket.
Now switch on the battery – if this has not yet been done.
Charging process will now start and end automatically as soon as battery will have been
fully charged.
• Only use chargers approved by Torqeedo. • Do not use any third
party chargers, especially no chargers for lead-gel or AGM batteries.
• Only charge battery on a non-flammable floor under supervision of
an adult.
• Only charge battery at ambient temperatures of between 0°C and
45°C / 32°F and 113°F.
• During charging process protect battery from water contact.
• Note instrcutions in charger operating manual.
• Do not connect solar panels directly to Power 24-3500.
• For connecting Power 24-3500 to a solar charger, please use only so-
lar regulators either distributed or explicitly approved by Torqeedo.
• Do not connect generators directly with Power 24-3500. Use a
Torqeedo charger to charge Power 24-3500 from generator.
• In case you don‘t succeed in recharging a totally discharged
battery, take battery and charger to Torqeedo service for inspection
(addresses on back of the present manual).
Содержание Power 24-3500
