Torqeedo Power 24-3500, Руководство по эксплуатации

Страница: 40 / 64

40
Deutsch
English
In the following, please find a selection of the most important instructions for operation of
Power 24-3500 battery. Beside these, please also observe complete operating manual to
prevent any damage to the battery.
• Only use equipment that does not draw more than 180 amps from one battery (at
nominal voltage corresponding to 4,660 watts). In case of batteries connected in parallel
you may draw 180 amps from each connected battery (in case of 2 batteries connected
in parallel, this corresponds to a withdrawal of 360 amps or 9,320 watts). Higher con-
sumption will trigger the electronic fuse. After elimination of overload, battery may be
switched on again.
• Insure correct polarity when connecting equipment and chargers.
• You will extend battery‘s service life if you do neither expose it directly to the sun nor to
high ambient temperatures longer than necessary. When stored for a longer period of
time, battery should have a residual charge of 20-40 %. Regularly check voltage so that
it is always higher than 21 V in order to prevent total discharge. Drawing on page 52 will
help you to precisely define your checking intervals.
• Ideal battery storage temperature is between 5° and 15°C / 41°F and 59°F.
WATCH OUT
This symbol warns about possible risks of damage caused to or
injuries caused by the battery.