4
STEP 4
Attach the pedals to the cranks
1. Thread the right pedal clockwise into the right crank arm (the side with the chain) by hand.
Tighten using an adjustable wrench.
2. Thread the left pedal counter-clockwise into the left crank arm (the side opposite the chain) by
hand. Tighten using an adjustable wrench.
STEP 5
Install the seat post assembly and adjust the seat
1. Open the quick release lever, loosening the seat clamp.
2. Slide the tube of the seat post assembly into the frame seat tube to a depth of at least 7cm.
WARNING! Minimum insertion line must be completely inserted into frame and must not
be visible!
3. Adjust the seat to the desired height. With the seat facing forward, tighten the seat post
clamp by closing the quick release lever. Make sure the seat does not spin or move up and
down. If it does, open the lever and tighten the nut on the other side to adjust the clamp
tightness. Repeat this process until the seat doesn’t move while the lever is closed.
