Step
7
Checking the Machine for
Grease
Parts needed for this step:
1 tube
Number 2 general purpose lithium base
or molybdenum base grease. (Purchase
separately.)
Procedure
1. Remove the belt covers on domestic machines
as shown below.
Figure 13
2. Remove the belt covers and bolts on
international machines as shown below.
Figure 14
3. Check the tensioning arm for grease.
4. Check the grease for the three spindle bearings.
If needed, add grease until it comes out of the
lower seals.
5. Install the belt covers.
Figure 15
6
