Toro Z597-D Z Master, Руководство оператора

Страница: 15 / 68

Product Overview
Figure 3
1. Motion control lever 5. Controls
2. Parking brake lever 6. Seat belt
3. Height-of-cut lever 7. Roll bar
4. Fuel cap (both sides) 8. Engine screen
Controls
Become familiar with all the controls before you
start the engine and operate the machine (Figure 3
and Figure 4).
Figure 4
1. Ignition switch 6. Fuel cap
2. Throttle control 7. Volt meter
3. Glow plug light 8. Engine Temperature gauge
4. Power take off (PTO) Switch 9. Water in fuel light
5. Hour meter
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure 4).
Glow Plug Light (Orange Light)
The glow plug indicator light turns on when the
ignition switch is turned to the on position. When
the light turns off, the engine is ready to be started
(Figure 4).
Water in Fuel Light (Red Light)
The water in fuel light turns on when there is water
in the fuel. When the indicator light turns off, the
engine is ready to be started (Figure 4).
Temperature Gauge
The temperature gauge registers the temperature
of the coolant in the cooling system (Figure 4).
Audible Alarm
This machine has an audible alarm that alerts the
user to turn off the engine or engine damage can
occur from over heating. Refer to Servicing the
Cooling System in Cooling System Maintenance,
page 44.
Volt Meter
The volt meter registers the output of the charging
system (Figure 4).
15