Replacing the PTO Drive Belt
Service Interval:
Every 50 hours
1. Disengage the PTO, move the motion control levers
to the neutral locked position and set the parking
brake.
2. Stop the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Loosen the front engine panel knobs and remove
the panel (Figure 58).
Figure 58
1.
Knob
2.
Front engine panel
4. Remove the spring from the idler arm (Figure 59).
5. Remove the clutch stop bracket.
6. Remove the old PTO drive belt.
7. Install the PTO drive belt around the clutch pulley
and the gearbox pulley (Figure 59).
8. Intall the clutch stop bracket.
9. Install the spring to the idler arm (Figure 59).
G001157
1
2
3
4
5
6
Figure 59
1.
PTO Drive belt
4.
Spring loaded idler pulley
2.
Clutch
5.
Gear box
3.
Spring
6.
Clutch stop bracket
Replacing the Pump Drive Belt
Service Interval:
Every 50 hours
Note:
Remove the PTO drive belt first if the pump
drive belt needs to be replaced.
1. Tilt the seat forward and remove the front engine
panel.
2. Remove the PTO drive belt.
3. Remove the spring from the idler arm (Figure 60).
4. Install the new belt around the engine and hydro
pump pulley (Figure 60).
5. Install the PTO drive belt.
6. Install the spring to the idler arm (Figure 60).
45
Содержание Z595-D Z Master
Страница 8: ...98 5954 103 1636 105 7798 107 1613 107 1857 107 1860 107 1861 8 ...
Страница 9: ...107 1864 107 2102 107 2112 107 2114 107 2449 108 5955 108 5957 9 ...
Страница 61: ...Schematics Wire Diagram Rev A 61 ...
Страница 62: ...Notes 62 ...
