Toro Z593-D Z Master 74264TE, Руководство оператора

Страница: 45 / 80

Adding Engine Oil
1. Tilt the seat forward and remove the front engine panel
(
Figure 61 ).
g001312
Figure 61
1. Knob 2. Front engine panel
2. Remove the oil-fill cap and dipstick ( Figure 62 ).
g001162
Figure 62
1. Engine 2. Oil-fill cap
3. Use a hose and funnel to add oil to the engine ( Figure
63 ).
4. Add oil slowly, checking the level frequently with the
dipstick until the level reaches the upper hole on the
dipstick. For the correct oil type and viscosity to use
in different temperature conditions, refer to
Servicing
the Engine Oil (page 41) .
g001163
Figure 63
1. Engine oil 2. Funnel and hose
Important:
Add the oil very slowly and do not
block the opening of the filler hole ( Figure 64 ). If
you add oil too fast or block the hole, the oil could
back up and foul the air intakes, causing engine
damage.
g000955
Figure 64
1. Note the clearance left in the filler opening.
5. Replace the dipstick and install the front engine panel.
6. Start the engine and run it at idle for 5 minutes.
7. Shut off the engine.
8. Wait 3 minutes and check the oil level.
9. Add oil, if required, to bring the level to the upper hole
on the dipstick.
10. Replace the dipstick, filler cap, and the front engine
panel.
11. Check for leaks.
Important:
Do not overfill the crankcase with oil
because this may cause engine damage.
45