Toro Z Master Z500 Series, Руководство оператора, Страница: 23 / 32

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 8 hours
• Inspect the blower belt.
• Inspect the collection system.
Before each use or daily
• Clean the hood screen.
• Clean the collection system.
Every 25 hours
• Inspect the blower belt.
Every 50 hours
• Grease the idler arm.
Every 100 hours
• Grease the handle pivot.
• Inspect the collection system.
Cleaning the Bagger Screen
Service Interval: Before each use or daily
Clean the screen before each use (more often in wet
grass).
1. Disengage the power take off (PTO) and set the
parking brake.
2. Turn off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Open the bagger.
4. Clean the debris from the screen.
5. Close the bagger.
Cleaning the Collection
System
Service Interval: Before each use or daily
1. Wash the inside and outside of the bagger hood,
tube, and the underside of the mower. Use a
mild automotive detergent to remove dirt.
2. Make sure you remove matted grass from all
parts.
3. After washing all parts, let them dry thoroughly.
Note:
With all parts installed, start and run the
machine for a minute to assist in drying.
Inspecting the Blower Belt
Service Interval: After the first 8 hours
Every 25 hours
Check the belts for cracks, frayed edges, burn marks,
or any other damage. Replace damaged belts.
Replacing the Blower Belt
1. Disengage the PTO, move the motion-control
levers to the N
EUTRAL
-
LOCKED
position, and set
the parking brake.
2. Stop the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Pull back on the spring-loaded idler pulley to
relieve the belt tension (
Figure 33 ).
4. Remove the existing bagger belt from the
mower-deck pulley and then the blower pulleys.
5. Install the new belt around the blower pulleys
and the mower-deck pulley (
Figure 33 ).
g003398
Figure 33
1. Idler pulley 4. Peg
2. Mower-deck pulley 5. Belt
3. Spring 6. Blower pulley
23