Toro Z Master 74936, Руководство оператора

Страница: 65 / 72

Figure 104
1. Clutch pulley 5. Square hole in the idler
arm for the ratchet
2. Mower belt 6. Idler grease zerk
3. Spring loaded idler pulley 7. Belt guide
4. Ratchet
7. Remove and retain the hardware on both sides of the
deck as shown in Figure 105.
Figure 105
1. Right stabilizer
2. Deck strut (right side shown)
3. Remove the rear deck lift attachment shoulder bolt and nut.
4. Remove the front deck lift attachment shoulder bolt and nut.
8. Raise the deck struts and secure them in the up
position. Slide the deck out to the right side of the
machine.
Replacing the Grass Deflector
WARNING
An uncovered discharge opening could allow the
lawn mower to throw objects in the operator's or
bystander's direction and result in serious injury.
Also, contact with the blade could occur.
Never operate the lawn mower unless you install a
cover plate, a mulch plate, grass deflector or bagger.
1. Remove the locknut, bolt, spring and spacer holding
the deflector to the pivot brackets (Figure 106).
Remove damaged or worn grass deflector.
65