Toro Workman 07040, Руководство оператора

Страница: 33 / 56

g033047
Figure 32
1. Flange-head bolts (3/8 x
3/4 inch) 3. Caliper bracket (brake
assembly)
2. Spindle
4. Remove the dust cap from the hub ( Figure 33 ).
g192346
Figure 33
1. Cotter pin 4. Spindle nut
2. Spindle 5. Nut retainer
3. Tab washer 6. Dust cap
5. Remove the cotter pin and nut retainer from the
spindle and spindle nut (
Figure 33 ).
6. Remove the spindle nut from the spindle, and
separate the hub and rotor assembly from the
spindle (
Figure 33 and Figure 34 ).
g192347
Figure 34
1. Spindle 2. Hub and rotor assembly
7. Wipe clean the spindle with a rag.
8. Repeat steps 1 through 7 to the hub and rotor at
the other side of the machine.
33