Toro UTV 700 EFI, Инструкции по настройке перед доставкой

Страница: 8 / 12

8
CHECKING ENGINE/
TRANSMISSION OIL LEVEL

NOTE: Inspect the area around the drain plug
(under the vehicle) and oil filter (front of the
engine) for leaks.
PR078A

NOTE: To access the oil filter, remove the seat.
Remove the screws securing the seat back and
remove the seat back; then remove the screws
securing the seat base and remove the seat base.

NOTE: The vehicle should be on level ground
when checking the engine oil level.
1. Raise the cargo box; then unscrew the oil level stick
and wipe it with a clean cloth.
PR053B
2. Install the oil level stick into the engine case thread-
ing the stick in for checking purposes.
3. Remove the oil level stick; the engine oil level
should be within the operating range but not above
the FULL mark.
GZ461A
Recommended Engine/
Transmission Oil
The recommended oil to use is Toro 0W-40 All Weather
synthetic engine oil, which has been specifically formu-
lated for use in this engine. Although Toro 0W-40 All
Weather synthetic engine oil is the only oil recom-
mended for use in this engine, use of any API certified
SM All-Weather synthetic 0W-40 oil is acceptable.
OILCHARTJ
CHECKING GEAR CASE
LUBRICANT LEVELS
1. Remove the front differential level plug; lubricant should
be visible at the plug threads. If low, add SAE approved
80W-90 hypoid lubricant to the fill plug as necessary.
Install the plug and tighten to 22 N-m (16 ft-lb).
CAUTION
Do not over-fill the engine with oil. Always make sure
the oil level is within the operating range.
CAUTION
Any oil used in place of the recommended oil could
cause serious engine damage. Do not use oils which
contain graphite or molybdenum additives. These
oils can adversely affect clutch operation. Also, not
recommended are racing, vegetable, non-detergent,
and castor-based oils.
CAUTION
Any lubricant used in place of the recommended lubri-
cant could cause serious front differential damage.