![background image](http://html1.mh-extra.com/html/toro/titan-hd-1500/titan-hd-1500_operators-manual_1132462081.webp)
g015594
Figure 126
1.
Bolt
5.
Spring installed
2.
Spacer
6.
Grass deflector
3.
Locknut
7.
J
-hook end of spring
4.
Spring
3.
Place the spacer and the spring onto grass
deflector.
4.
Place 1 J-hook end of the spring behind the
deck edge.
Note:
Make sure that 1 J-hook end of the
spring is installed behind the deck edge before
installing the bolt as shown in
.
5.
Install the bolt and the nut.
6.
Place 1 J-hook end of the spring around the
grass deflector (
).
Important:
The grass deflector must be able
to rotate. Lift the deflector up to the full open
position and ensure that it rotates into the
full down position.
Cleaning
Cleaning under the Mower
Deck
Service Interval:
Before each use or daily
1.
Park the machine on a level surface, disengage
the blade-control switch (PTO), and engage the
parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Raise the mower deck to the T
RANSPORT
position.
Cleaning the Suspension
System
Service Interval:
Before each use or daily
Use compressed air to clean the suspension system.
Note:
Do not clean the shock assemblies with
pressurized water (
g195820
Figure 127
Disposing of Waste
Engine oil, batteries, hydraulic fluid, and engine
coolant are pollutants to the environment. Dispose of
these according to your state and local regulations.
81
Содержание TITAN HD 1500
Страница 85: ...Schematics g018479 Wire Diagram Toro Engines Rev A 85...
Страница 86: ...g036151 Wire Diagram Kohler Engines Rev A 86...
Страница 87: ...g037072 Wire Diagram Kawasaki Engines Rev A 87...
Страница 88: ......