Toro TimeMaster 20976, Руководство оператора

Страница: 6 / 128

Setup
Important:
Remove and discard the protective
plastic sheet that covers the engine and any other
plastic or wrapping on the machine.
Important:
To prevent accidental starting, do not
insert the key into the electric-start ignition until
you are ready to start the engine (electric-start
model only).
1
Assembling the Handle
No Parts Required
Procedure
WARNING
Assembling and unfolding the handle
improperly can damage the cables, causing
an unsafe operating condition.
• Do not damage the cables when unfolding
the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Rotate the upper handle so that it nests together
with the lower handle (
Figure 3 ), and tighten
both knobs on the handle to lock the upper
handle in place (
Figure 4 ).
g016547
Figure 3
1. Upper handle 2. Knob (2)
2. Release the handle-lock lever ( Figure 4 ).
g016551
Figure 4
1. Handle-lock lever
3. Pull the handle rearward and lock it into position
(
Figure 4 ).
5