Toro TimeCutter SW3200, Руководство оператора

Страница: 23 / 52

Operating the Machine
Move the bypass levers rearward through the key hole and
down to lock them in place as shown in
Figure 17 .
Note:
Ensure this is done for each lever.
Converting to Side Discharge
This mower deck has the option to be operated in the
side-discharge mode. Remove the discharge cover for
operating in the side-discharge mode.
Removing the Discharge Cover for Side
Discharge
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Move the motion-control levers outward to the P
ARK
position, stop the engine, remove the key, and wait for
all moving parts to stop before leaving the operating
position.
3. Remove the wing nut and bolt securing the cover in
place (
Figure 18 ).
Note:
Retain all of the parts for future use.
Figure 18
1. Grass deflector 4. Hinge pin
2. Discharge cover 5. Wing nut
3. Lower lip
4. Remove the hinge pin securing the cover to the deck
(
Figure 18 ).
5. Lift the cover out and away from the deck.
6. Lower the grass deflector over the discharge opening.
Important:
Ensure that the mower has a hinged
grass deflector that disperses clippings to the side
and down toward the turf, while in side discharge
mode.
Installing the Discharge Cover for
Mulching
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Move the motion-control levers outward to the P
ARK
position, stop the engine, remove the key, and wait for
all moving parts to stop before leaving the operating
position.
3. Lift the grass deflector and place the discharge cover
over the opening onto the lower lip of the mower and
slide it into the front hinge (
Figure 18 ).
4. Slide the hinge pin through the hinge ( Figure 18 ).
5. Secure the discharge cover to the mower with the wing
nut (
Figure 18 ).
6. Lower the grass deflector over the discharge opening.
23