Toro TimeCutter SS 3216, Руководство оператора

Страница: 32 / 48

Cooling System
Maintenance
Cleaning the Engine Screen
Service Interval: Before each use or daily—Clean the engine
air-intake screen.
To ensure proper cooling, make sure the grass screen, cooling
fins, and other external surfaces of the engine are kept clean
at all times.
Use a dry brush to clean grass and accumulated debris from
the air-intake screen and around the engine.
Important:
To prevent contaminating the fuel system,
do not use water to clean the engine.
Cleaning the Engine-cooling
Fins and Shrouds
Service Interval: Every 100 hours—Clean the engine-cooling
fins and shrouds.
1. Disengage the blade-control switch, and move the
motion-control levers to the neutral-locked position
and apply the parking brake.
2. Stop the engine, remove the key, and wait for all moving
parts to stop before leaving the operating position.
3. Remove the air-intake screen and cooling shrouds.
4. Clean the debris and grass from the engine parts.
5. Install the air-intake screen and cooling shrouds.
Mower Maintenance
Servicing the Cutting Blades
Maintain sharp blades throughout the cutting season, because
sharp blades cut cleanly without tearing or shredding the grass
blades. Tearing and shredding turns grass brown at the edges,
which slows growth, and increases the chance of disease.
Check the cutter blades daily for sharpness, and for any
wear or damage. File down any nicks and sharpen the
blades as necessary. If a blade is damaged or worn, replace
it immediately with a genuine Toro replacement blade. For
convenient sharpening and replacement, you may want to
keep extra blades on hand.
WARNING
A worn or damaged blade can break, and a piece
of the blade could be thrown into the operator's
or bystander's area, resulting in serious personal
injury or death.
• Inspect the blade periodically for wear or
damage.
• Replace a worn or damaged blade.
Before Inspecting or Servicing the
Blades
Park the machine on a level surface, disengage the
blade-control switch, move the motion-control levers outward
to the park position, stop the engine, and remove the key.
32