Toro TimeCutter MX 4200, Инструкции по установке

Страница: 1 / 4

Form No. 3388-201 Rev A
TimeCutter ® Riding Mowers
For All TimeCutter ® Riding Mowers
Setup Instructions
Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure Description Qty. Use
1
No parts required
–
Connect the battery.
Rear hitch 1
Bolt (5/16 x 1 inch) 2
2
Locknut (5/16 inch) 2
Install the rear hitch.
3
No parts required
–
Set up the motion-control levers.
4
No parts required
–
Connect the seat-hold bar.
5
No parts required
–
Check the mower adjustment.
Ignition key 1
Hose coupling (not included with CE
models)
1
Operator's Manual 1
Engine Operator's Manual 1
6
Operator training material 1
Complete the setup.
Note:
Determine the left and right sides of the machine from the normal operating position.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420 Register at www.Toro.com. Original Instructions (EN)
Printed in the USA.
All Rights Reserved
*3388-201* A