Toro TimeCutter HD X5450, Руководство оператора

Страница: 19 / 60

Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the mower
blades and any powered attachments.
Engaging the Blade-Control Switch
(PTO)
G008945
g008945
Figure 16
Note:
Always engage the blades with the throttle in the F
AST
position ( Figure 17 ).
g187516
Figure 17
Disengaging the Blade-Control Switch
(PTO)
G009174
g009174
Figure 18
Operating the Throttle
You can move the throttle control between the F
AST
and
S
LOW
positions ( Figure 19 ).
Always use the F
AST
position when turning on the mower
deck with the blade-control switch (PTO).
g187517
Figure 19
Operating the Choke
Use the choke to start a cold engine.
1. If the engine is cold, use the choke to start the engine.
2. Pull up on the choke knob to engage the choke before
using the ignition switch (
Figure 20 ).
3. Push down on the choke to disengage the choke after
the engine has started (
Figure 20 ).
G008959
1
2
g008959
Figure 20
1. O
N
position 2. O
FF
position
19