Toro TimeCutter HD MyRide 60in, Руководство оператора

Страница: 14 / 32

6. Align the baffle-mounting tabs with the baffle slots in
the hood, and push the mounting tabs up and through
the slots (
Figure 13 ).
7. Secure the baffle to the hood by inserting the hairpins
into the holes in the baffle-mounting tabs as shown
in
Figure 14 .
g018354
1
2 3 4
6
5
Figure 14
Bagger Hood Assembly
1. Hairpin
4. Baffle slot
2. Bagger hood 5. Baffle
3. Baffle-mounting tab 6. Duct seal
8
Installing the Hood Assembly
and Bags
Parts needed for this procedure:
1 Hood assembly
2 Bag
Procedure
Remove the air-cleaner cover as follows:
1. Open the 2 latches that secure the air-filter cover to the
air-filter housing (
Figure 15 ).
1
2 3
G018608
Figure 15
Air-Cleaner Cover Removal
1. Air-cleaner cover 3. Air-cleaner latch
2. Breather valve
2. Pull the air-filter-cover back and remove the air-filter
cover.
Install the hood assembly as follows:
1. On the hood, locate the keyhole slot in the left and
right-hood brackets (
Figure 16 ).
2. On the hopper-support frame, locate the 2 keyed pins
at the pivot brackets on the top of the hopper-support
frame (
Figure 16 ).
14