Toro TimeCutter HD MyRide 48in, Руководство оператора

Страница: 21 / 56

Operating the Throttle
You can move the throttle control between the F
AST
and S
LOW
positions ( Figure 20 ).
Always use the F
AST
position when turning on the
mower deck with the blade-control switch (PTO).
g187517
Figure 20
Operating the Choke
Use the choke to start a cold engine.
1. If the engine is cold, use the choke to start the
engine.
2. Pull up on the choke knob to engage the choke
before using the ignition switch (
Figure 21 ).
3. Push down on the choke to disengage the choke
after the engine has started (
Figure 21 ).
G008959
1
2
g008959
Figure 21
1. O
N
position 2. O
FF
position
Operating the Ignition
Switch
1. Turn the ignition key to the S
TART
position
( Figure 22 ).
Note:
When the engines starts, release the key.
Important:
Do not engage starter for more
than 5 seconds at a time. If the engine fails
to start, allow a 15 second cool-down period
between attempts. Failure to follow these
instructions can burn out the starter motor.
Note:
You may need multiple attempts to start
the engine when you start it the first time after
the fuel system has been without fuel completely.
ST
ART
RUN
ST
OP
G008947
g008947
Figure 22
2. Turn the ignition key to shut off the engine.
21