Toro TEMPUS-AG-MS
5
Step 4
SENSOR INSTALLATION
To ease the sensor installation we advise to follow the MyToroTempus mobile application instruction.
1.
Get closer than 10 meters from TEMPUS-AG-MS and make sure your smartphone's Bluetooth is turned on.
2.
Launch MyToroTempus app from your smartphone or tablet.
3.
Select the TEMPUS-AG-MS previously installed. (The two devices, smartphone and MS device, must be connected
via Bluetooth)
4.
Click on “Add a sensor”
5.
Select the type of sensor you want connect to your TEMPUS-AG-MS.
6.
Select the sensor you want connect to your TEMPUS-AG-MS.
7.
To properly connect the wiring and complete the sensor installation, follow the next steps described in the app.
Configurable acquisition inputs (3 inputs for S4 model, 1 input for S1 model)
• Dry contact (rain sensor, anemometer, ...)
• Pulsive (flowmeter, ...)
• Analog 0-3.5V (humidity sensor, solar radiation...)
Red wires: 3.5V power supply
Data
3,5V
Note:
The Tempus-AG-S1 has only 1 configurable acquisition input (three-wire entry) and it doesn't have
temperature sensor input (two-wire entry).
WIRING
Temperature sensor input.
PT100 Standard (not present in S1 model)