Figure 42
2.
To unfold the handle, refer to
1 Assembling and Unfolding the Handle (page 5).
Removing the Machine from
Storage
1.
Charge the battery; refer to
Charging the Battery (page 16).
2.
Check and tighten all fasteners.
3.
Remove the spark plug and spin the engine rapidly
using the starter to blow the excess oil from the
cylinder.
4.
Install the spark plug and tighten it with a torque
wrench to 20 N-m (15 ft-lb).
5.
Perform any needed maintenance procedures; refer to
Preparing for Maintenance (page 15).
6.
Check the engine oil level; refer to
Checking the Engine Oil Level (page 8).
7.
Fuel the fuel tank with fresh gasoline; refer to
Filling the Fuel Tank (page 8).
8.
Connect the wire to the spark plug.
19
