Toro Super Recycler 20382, Руководство оператора

Страница: 20 / 72

g003235
Figure 38
4. Remove the blade, saving all mounting
hardware.
5. Install the new blade and all mounting hardware.
Important:
Position the curved ends of the
blade to point toward the machine housing.
6. Use a torque wrench to tighten the blade bolt
to 82 N-m (60 ft-lb).
Important:
A bolt torqued to 82 N-m (60
ft-lb) is very tight. While holding the blade
with a block of wood, put your weight
behind the ratchet or wrench and tighten the
bolt securely. This bolt is very difficult to
overtighten.
Adjusting the Self-Propel
Drive
Whenever you install a new self-propel cable or if
the self-propel drive is out of adjustment, adjust the
self-propel drive.
1. Turn the adjustment knob counterclockwise to
loosen the cable adjustment (
Figure 39 ).
g027709
Figure 39
1. Handle (left side) 3. Self-propel-drive cable
2. Adjustment knob
2. Adjust the tension on the cable ( Figure 39 ) by
pulling it back or pushing it forward and holding
that position.
Note:
Push the cable toward the engine to
increase the traction; pull the cable away from
the engine to decrease the traction.
3. Turn the adjustment knob clockwise to tighten
the cable adjustment.
Note:
Tighten the knob firmly by hand.
19