Toro Super Recycler 20062, Руководство оператора

Страница: 6 / 20

2. Filling the Engine with Oil
Your mower does not come with oil in the engine.
1. Remove the dipstick (Figure 7).
Figure 7
2. Slowly pour oil into the oil fill tube until the oil level
reaches the Full line on the dipstick (Figure 7). Do not
overfill. (Max. fill: 20 oz. (0.59 l), type: SAE 30W
detergent oil with an API service classification of SF,
SG, SH, SJ, SL, or higher.)
3. Install the dipstick securely.
Important:
Change the engine oil after the first 5
operating hours; change it yearly thereafter. Refer
to Changing the Engine Oil.
3. Installing the Fuse
Your mower comes with a 40-amp fuse that protects the
electric starter.
Important:
You cannot start the mower with the
electric starter or charge the battery unless you install
the fuse.
1. Unclip both ends of the battery cover and remove it
(Figure 8).
Figure 8
2. Install the fuse in the fuse holder (Figure 9).
Figure 9
Note:
Your mower comes with a fuse in the your
owner’s packet and another fuse in the battery box.
3. Install the battery cover.
4. Charging the Battery
Refer to Charging the Battery in the Maintenance section.
Product Overview
Figure 10
1. Upper handle 8. Spark plug
2. Handle knob (4) 9. Cutting height lever (4)
3. Battery (not shown) 10. Oil ll/Dipstick
4. Fuel tank cap 11. Recoil start handle
5. Side discharge 12. Electric starter
6. Air lter 13. Blade control bar
7. Primer
Figure 11
1. Grass bag 3. Battery charger
2. Side discharge chute 4. Rear discharge plug (installed)
6