Toro Spray Master, Руководство оператора

Страница: 14 / 88

Engine Controls
g317354
Figure 9
1. Throttle control 3. Hour meter
2. Choke control 4. Ignition switch
Ignition Switch
The ignition switch is located at the left side of the
control console (
Figure 9 ).
Use the ignition switch to start and run, or shut off the
engine. The ignition switch has 3 positions: S
TOP
,
R
UN
and S
TART
.
Note:
You must engage the parking brake to start
the engine.
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
LOW
to F
AST
position ( Figure 9 ).
Choke Control
Use the choke control to start a cold engine.
Hour Meter
The hour meter displays the total hours of engine
operation. The hour meter (
Figure 9 ) starts to function
whenever you rotate the key switch to the O
N
position
or if the engine is running.
Spreader Controls
g317353
Figure 10
1. Impeller-speed control 3. Diffuser control
2. Deflector control 4. Hopper-door control
Impeller-Speed Control
Use the impeller-speed control ( Figure 10 ) to set the
speed of the hydraulic motor for the spreader.
Hopper-Door Control
The hopper-door control ( Figure 10 ) opens and closes
the door inside the base of the hopper
Deflector Control
The deflector control ( Figure 10 ) pivots the deflector
into the spreader pattern.
Diffuser Control
The diffuser control ( Figure 10 ) shifts the product
placement of the impeller either to the edge of the
impeller or to the middle of the impeller.
14