g375339
Figure 38
1.
Year of production decal
2.
Serial plate
2.
Remove the backing from the year of production
decal.
3.
Apply the decal to the floor bracket.
Applying the CE Warning Decal
1.
Use rubbing alcohol and a clean rag to clean the
surface of warning decal 133-2930, and allow the
decal to dry (
).
g375338
Figure 39
1.
CE warning decal
2.
Warning decal 133-293
2.
Remove the backing from the CE warning decal.
3.
Apply the CE warning decal over decal 133-293.
Product Overview
g216864
Figure 40
1.
Engine hood
5.
Seat adjustments
2.
Seat
6.
Front cutting units
3.
Control arm
7.
Rear cutting units
4.
Steering wheel
Controls
Traction Pedal
The traction pedal (
) controls the forward and
reverse operation. Press the top of the pedal to move the
machine forward and the bottom to move the machine
backward. Ground speed depends on how far you press
the pedal. For no load, maximum ground speed, fully press
the pedal while the throttle is in the F
AST
position.
To stop the machine, reduce foot pressure on the traction
pedal and allow it to return to the center position.
21
