Toro Recycler 20357, Руководство оператора

Страница: 17 / 72

g206300
Figure 23
1. Washout port
6. Turn the water on.
7. Start the engine and run it until there are no more
clippings that come out from under the machine.
8. Shut off the engine.
9. Shut off the water and disconnect the garden
hose from the machine.
10. Start the engine and run it for a few minutes to
dry the underside of the machine to prevent it
from rusting.
11. Allow the engine to cool before storing the
machine in an enclosed area.
Folding the Handle
WARNING
Folding or unfolding the handle improperly
can damage the cables, causing an unsafe
operating condition.
• Do not damage the cables when folding or
unfolding the handle.
• If a cable is damaged, contact an
Authorized Service Dealer.
1. Disengage the handle locks until you can move
the upper handle freely.
2. Fold the handle forward either to the vertical
position or the fully forward position as shown
in
Figure 24 .
Important:
Route the cables to the outside
of the handle locks as you fold the handle.
g209023
Figure 24
1. Handle lock engaged
position 2. Handle lock disengaged
positions
3. To unfold the handle, refer to 1 Unfolding the
Handle (page 5) .
16